9
control” to control the power level, by touching anywhere along its
length.
You can change the heat setting at any time during cooking.
To use more than one heating zone, just repeat a similar procedure for
each zone you wish to use (as above).
To switch heating zones o
Activate the “Heating zone control” for the zone you want to turn o
by touching the relevant “Heating zone control” key. Use the “Slider
control” to scroll down to “0“.
To switch all heating zones o at once it is only necessary to touch the
“On/O” control .
Using the dual zone function
This function is only applicable to the back right and centre cooking
zones.
You can use either just the central area, or the enlarged areas of
either of these zones.
Touch the “Heating zone control“ corresponding to either the back
right or centre zone to activate it.
Select a heat setting by using the “Slider control” as above. You may
select any power level from “1” to “9”. The centre area will heat up
To Next Page
Loading...
Need help?
General
