13
• The appliance must be installed with adequate ventilation. Ensure
that there is 10cm clearance above the appliance, and that there is
space between the rear of the appliance and the wall.
Troubleshooting
If you have any problems with your appliance, you should check
the troubleshooting prior to calling CDA Customer Care, to prevent
unnecessary service calls and potential cost.
If the appliance is not working
• Check there is power to the appliance.
• The control panel is lit.
• The house fuses are intact and the fuse in the plug has not blown.
• The fridge is not in holiday mode.
• The plug socket is functioning correctly. To check this, plug another
electrical appliance in to see if the socket is working.
The appliance is working, but not very well
• The appliance is not overloaded.
• The temperature is set to an appropriate level.
• The doors are closing properly.
• The cooling system at the rear of the appliance is clean and free of
dust, and not touching the rear wall.
• There is enough ventilation at the side and rear walls.
To Next Page
Loading...
