15
Installation and
Ventilation
This appliance must never be
installed close to heat sources
i.e. heating elements and cookers or
in damp places
Failure to provide adequate ventilation
can lead to increased running costs
and premature failure; it may also
invalidate the warranty provided with
the product.
• Ensure ventilation openings are kept clear.
• Do not use a multi-plug adaptor in the socket to connect this
appliance alongside other appliances.
• Do not tilt the fridge beyond 45º.
• Do not exert excessive pressure on the appliance.
• Locate the appliance in a well ventilated position, away from heat
sources, damp and direct sunlight.
• Ensure that there is a gap of no less than 10cm above and to the
sides of the appliance to allow for ventilation. The clearance
between the sides and adjacent furniture will also allow the doors to
open fully.
• A gap of 5cm should be allowed for ventilation between the rear
wall and the back of the appliance.
Fig. 3
707
1780
785
To Next Page
Loading...
