EasyManuals Logo

CDA RC9300 User Manual

CDA RC9300
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
24
Fig. 26
650 mm
500 mm
200 mm
450 mm
air vent
Location
This cooker has class “2/1” overheating protection so that it can be installed
next to a cabinet.
If the cooker is installed adjacent to furniture which is higher than the gas hob cook-
top, a gap of at least 200 mm must be left between the side of the cooker and the fur-
niture.
The furniture walls adjacent to the cooker must be made of material resistant to heat.
The veneered synthetic material and the glue used must be resistant to a temperature
of 90°C in order to avoid ungluing or deformations.
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.
It is essential that the cooker is positioned as stated below.
The cooker must be installed by a qualified technician and in compliance with
local safety standards.
If the cooker is located on a pedestal it is necessary to provide safety measures to pre-
vent falling out.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CDA RC9300 and is the answer not in the manual?

CDA RC9300 Specifications

General IconGeneral
BrandCDA
ModelRC9300
CategoryKitchen Appliances
LanguageEnglish

Related product manuals