16 | Instruction Manual
Steam clean function
When the steam clean function is selected, the programme will
start and there is no option to adjust the temperature. The function
operates as a preset programme with the oven temperature at 80°C
and a duration of 30 minutes. When the function is in progress the
and symbols will be illuminated. To use the steam clean function,
follow the steps below.
• Pour 150ml of water directly on to the bottom of the oven cavity
and close the door
• Touch the sensor and the function will start
• Once the 30 minutes has elapsed a continuous beep will be
heard, press any sensor to mute the beep
• Allow the oven to cool completely and wipe any excess water
away with a dry cloth
Please note: Excess steam may escape when the oven door is
opened and condensation may drip from the bottom of the door
Rapid preheating
The rapid preheating function allows the oven elements to work at
their maximum capability in order to get the oven to temperature as
quickly as possible. To use the rapid heating function, follow the steps
below.
• First select a heating function and temperature
• Touch the sensor and the function will start
• The sensor will be illuminated until the temperature set has
been reached, upon which the sensor will go out and the function
will stop
• The function can be turned o at any time by pressing
To Next Page
Loading...
