CDA VM231 User Manual

11
Oven Controls and Use
Setting the Clock
• Press the “Clock/Timer” button once: The hours figure will flash.
• Turn the “Timer/Weight/Auto Menu” knob in either direction to set
the hours (between 0 - 23), note the appliance works in the 24hour
clock format.
• Press the “Clock/Timer” button again: The minutes figure will flash.
• Turn the “Timer/Weight/Auto Menu” knob in either direction to set
the minutes (between 0 - 59).
• Press the “Clock/Timer” button again to finish setting the time: The
“:” will flash and the time will light up.
Microwave Cooking
• Press the “Microwave” button once: The Display will show “P100”.
• Turn the “Timer/Weight/Auto Menu” knob in either direction to
set the power level (Alternatively, you may prefer to press the
“Microwave” button repeatedly until the required power level is
shown). This can be set at 100%, 80%, 50%, 30% or 10% of full
power; the display shows “P100”, “P80”, “P50”, “P30” or “P10”.
• Press the “Start/+30 Sec/Confirm” button to confirm the power level.
• Turn the “Timer/Weight/Auto Menu” knob in either direction to set
the cooking time. This can be set between “00:05” and “95:00”
minutes.
• Press the “Start/+30 Sec/Confirm” button again to start cooking.

CDA VM231 Specifications

General

Brand	CDA
Model	VM231
Category	Microwave Oven
Language	English