CDVI CDV-DDP - Page 14

Item Description
Factory
set
Language
Tochangelanguage.thecodeformatis4digits.Pleaserefer
topart5,section10(changedoorstationlanguage)formore
detailinformations.
01
ToneSelect
SelectthechimeofDoorStationincallingwaitstate,12
chordtunesareavailable,keyin01to12toselect.
03
ToneVolume
Adjustthetonevolumefordoorstationincalling.Rangefrom
01~15
08
UnlockCode
TochangeunlockcodeinCommonCodeUnlockmode,in
4-digitsformat.1111isthedefaultunlockcode.
[1111]
DisplayMode
ToselecttheDoorStationscreenmenu.Ifsetto0,the
screendisplaysthevisitor'simagewhentalking.Ifsetto1,the
screendisplaysiconswhentalking.
[0]
Clock...
Tosetdateandtime.
Dateformat:ifsetto0,dateformatisDD/MM/YY,ifsetto
1,dateformatisMM/DD/YY.
Timeformat:ifsetto0,timeformatis24hourstandard.Ifset
to1,timeformatis12hourstandard.
SetupCode TochangetheProgramCode. [88888888]
About...
1.Hardwareversion---ToshowtheDoorStation(including
ACS)hardwareinformation
2.Softwareversion---ToshowtheDoorStation(including
ACS)softwareinformation
3.ManufactureDate---Toshowthemanufacturingdate
4.DialingCounts---Toshowthecalloperationcounts
5.CallsCounts---Toshowtheestablishedcallingcounts
6.UnlockCounts---Toshowtheunlockoperationcounts
7.StandbyVoltage---Toshowthevoltagethatthedoorsta-
tioninstandby.
8.WorkingVoltage---Toshowthevoltagethatthedoorsta-
tioninworking.
9.VideoStandard---PALorNTSCstandard
10.UI_CODE---ToshowtheUIbytecountsandcheckbox
11.MCM-VER---ToshowtheversionandlanguageforMCM
12.Updated---ToshowtheupdatedtimeforUI
Default...
RestoreallSetupparameterstofactorydefaultsetting,Please
notethatthisoperationisanirreversible
Table3(Setup):
-12-