CEA TREO 1800 Synergic MIG-MAG User Manual

TREO 1800
synergic
EN
Operator’s manual
READ CAREFULLY
1020HA90B-EN-12/2014 SN - XN xxxxxx
CEA COSTRUZIONI ELETTROMECCANICHE ANNETTONI S.p.A.
C.so E. Filiberto, 27 - 23900 Lecco - Italy
Tel. ++39.0341.22322 - Fax ++39.0341.422646
Cas. Post. (P.O.BOX) 205
e-mail: cea@ceaweld.com - web: www.ceaweld.com

CEA TREO 1800 Synergic MIG-MAG Specifications

General

Brand	CEA
Model	TREO 1800 Synergic MIG-MAG
Category	Welding System
Language	English

Summary

Product Description

Product Overview

Multi-function inverter generator for MIG-MAG, MMA, and TIG welding.

Technical Specifications

Usage Limits (IEC 60974-1)

Machine Setup and Handling

Installation Site and Connections

Guidance on choosing an installation site and connecting the utility line.

Operator Interface and Wire Feed

Control Panel Layout

Identifies and explains the functions of front panel controls and indicators.

Wire Loading and Drive Roller Setup

Procedures for loading wire and assembling the drive roller mechanism.

MIG-MAG Welding with Gas

Gas Welding Cable Connections

Connect the gas hose, torch, and earthing cable for MIG-MAG welding.

Performing Gas MIG-MAG Welding

MIG-MAG Welding without Gas

Gasless Welding Cable Setup

Performing Gasless MIG-MAG Welding

Advanced Welding Processes

Interval Welding (Stitch)

TIG Welding with Lift Ignition

TIG process with 'Lift' ignition for reduced tungsten inclusions.

MMA Electrode Welding

MMA Cable Connection & Parameters

Machine Maintenance

Pre-Inspection Safety Precautions

Troubleshooting and Parts

Common Difficulty Troubleshooting

Detailed Troubleshooting Guide

Defects and Solutions Table

Table listing common machine defects, their causes, and solutions.