Why my Cecotec Hob does not turn on?
If your Cecotec Hob isn't turning on, first ensure it's properly connected to the power supply and switched on. Check for any power failures in your home. If it still doesn't work, there may be an electrical issue.
What to do if Cecotec Hob cookware does not heat up?
Your Cecotec Hob might not be heating the cookware because it's incompatible with induction cooking. Ensure you're using cookware specifically designed for induction hobs. Also, the hob may not detect the cookware if it's too small for the cooking zone or not properly centered. Try centering the cookware and making sure its base matches the size of the cooking zone.
Why is it difficult to use touch icons on cecotec BOLERO SQUAD I 3100 Hob?
If you're finding it hard to use the touch icons on your Cecotec Hob, it could be because the icons are slightly wet, or you're pressing them with your fingertip. Ensure the touch icons are dry and press them with the base of your finger.
Why is the glass damaged on my Cecotec Hob?
The glass of your Cecotec hob might be damaged due to cookware with rough edges or the use of inappropriate and abrasive scouring pads or cleaning products. Use cookware with flat and smooth bases.
Procedure for carefully gluing the supplied sealing gasket to the induction hob edge.
Requirements for installation, including distances and compliance with legislation.
Details on suitable and unsuitable materials for induction hob cookware.
Guidelines on matching cookware diameter to cooking zone size for optimal use.
General| Number of Cooking Zones | 3 |
|---|---|
| Type | Induction |
| Control Type | Touch |
| Timer | Yes |
| Safety Lock | Yes |
| Voltage | 220-240V |
| Frequency | 50-60 Hz |
| Boost Function | Yes |
| Auto Shut-off | Yes |
| Safety Features | Overheat protection |
To Next Page
