cecotec bolero SQUAD 3000

Questions and Answers

M
Micheal WilliamsSep 4, 2025
Why is the fan motor in my cecotec bolero SQUAD 3000 making unusual noises?
- T
  Todd HallSep 4, 2025
  If the fan motor in your Cecotec Hob is making unusual noises, the motor fan may be damaged. Substitute the fan.
E
Elizabeth CarneySep 18, 2025
What does error code E1 mean on my cecotec bolero SQUAD 3000 Hob?
- A
  Adrian LewisSep 18, 2025
  If your Cecotec hob shows the error code E1, it indicates a fault in the temperature sensor of the ceramic hob - short- circuit. Check the connection or substitute the temperature sensor of the ceramic hob.
M
Matthew CollinsSep 16, 2025
What does error code E4 mean on my cecotec bolero SQUAD 3000?
- M
  Mr. Tyler Morgan MDSep 16, 2025
  If your Cecotec hob displays the error code E4, it indicates a fault in the temperature sensor of the insulated-gate bipolar transistor - open circuit. Substitute the power supply board.
S
sara77Sep 14, 2025
What does error code E7 mean on my cecotec bolero SQUAD 3000 Hob?
- A
  Andrew MorganSep 14, 2025
  If your Cecotec hob shows the error code E7, it means that the voltage of the power supply is lower than the rated voltage. Check if the power supply operates correctly. After connecting to the mains, the product turns on as usual.
M
millerabigailSep 12, 2025
What does error code E3 mean on my cecotec bolero SQUAD 3000 Hob?
- B
  bobby47Sep 13, 2025
  If your Cecotec hob shows the error code E3, it indicates a high temperature of the hob sensor. Wait for the hob temperature to return to normal. Press the On/off button to restart the product.
J
Jacob SmithSep 12, 2025
What does error code E6 mean on my cecotec bolero SQUAD 3000?
- P
  Pamela HoltSep 12, 2025
  If your Cecotec hob shows the error code E6, it indicates an insulated-gate bipolar transistor high temperature. Wait for the transistor temperature to return to normal. Press the On/off button to restart the product. Check if the fan operates as usual, if not, substitute the fan.
M
Matthew GarrettSep 9, 2025
Why does my Cecotec Hob show 'u' when heating similar sized areas?
- B
  Brenda WattsSep 9, 2025
  If your Cecotec Hob displays 'u' when trying to heat areas of the same size, it could be due to: * The power supply board and the board connected to the display malfunction. Check the connections. * The display board on the communication unit is damaged. Substitute the display board. * The main board is damaged. Substitute the power supply board.
M
Michael DavisSep 7, 2025
How to prevent glass damage on my cecotec bolero SQUAD 3000 Hob?
- D
  Diana BaldwinSep 7, 2025
  To prevent glass damage on your Cecotec Hob, avoid using cookware with rough edges and refrain from using inappropriate and abrasive scouring pads or cleaning products. Use cookware with flat and smooth bases. Check the ‘Selection of the suitable cookware’ section. Check the ‘Cleaning and maintenance’ section.
C
Connie GreenSep 5, 2025
What to do if some buttons or the LED display on my cecotec bolero SQUAD 3000 aren't working?
- T
  thomassabrinaSep 5, 2025
  If some buttons on your Cecotec Hob aren't working, or the LED display isn't functioning as usual, the display may be damaged. In this case, substitute the display board.
C
cdavidsonAug 21, 2025
How to turn on my Cecotec Hob?
- P
  Patrick DanielsAug 21, 2025
  If your Cecotec Hob isn't turning on, first ensure it's properly connected to the mains and switched on. Check for any power failures in your area. If the hob is correctly connected and there is no power failure, but the problem persists, contact the official Cecotec Technical Service.