cecotec bolero SQUAD 3000 - Specific faults and solutions

72
ENGLISH
Specic faults and solutions
Fault Problem Solution A Solution B
The LED does not turn
on when the unit is
connected.
There is no
electricity.
Check if the plug is
correctly xed in
the mains and if the
latter works.
The auxiliary power
supply board and
the board connected
to the display
malfunction.
Check the
connections.
The auxiliary power
supply board is
damaged.
Substitute the power
supply board.
The display is
damaged.
Substitute the
display board.
Some buttons do not
work, or the LED display
does not work as usual.
The display is
damaged.
Substitute the
display board.
The cooking power
indicator turns on, but
the heating does not
start.
High temperature of
the cooking hob.
The room
temperature may
be high. The air inlet
or outlet may be
blocked.
The fan is faulty. Check if the fan
operates as usual.
If not, substitute the
fan.
The power supply
board is damaged.
Substitute the power
supply board.
02502_Placa Bolero Squad I 3000 _IM_YV_01220125.indd 7202502_Placa Bolero Squad I 3000 _IM_YV_01220125.indd 72 10/2/22 17:3610/2/22 17:36