BOLERO SQUAD I 3000
63
ENGLISH
4 Select the power by pressing the + and/or - buttons.
- If you do not select the power in 1 minute, the hob will turn o automatically. You must turn
it on again and return to step 1.
- You can modify the power any time while cooking.
If the display shows and the power setting alternatively.
This can mean:
- You have not placed the cookware in the correct cooking area.
- The cookware you are using is not suitable for the induction hob.
- The cookware is too small or is not centred correctly in the cooking area.
If you do not place a suitable cookware in the cooking area, it will not produce heat.
The display will turn o automatically after 2 minutes if you do not place any cookware.
Finishing the cooking
Fig. 17
1 Press the cooking area selection button from the area you wish to turn o.
2 To turn o the cooking area, press - until the value shows 0 or press the + and - buttons at
once. Make sure the display shows 0.
3 Turn o the hob completely by pressing the On/o button.
Caution with hot surfaces
Fig. 18
The hob will show H on any cooking area which is hot to the touch after use. The H will disappear
when the surface has cooled down and reached a safe temperature. You can also use a hot hob
to save energy if you wish to heat more frying pans.
Use of the Boost function
Activation of the Boost function
Fig. 19
1 Press the cooking area selection button.
2 Press the Boost button, the area indicator will show P and the power will reach the
maximum temperature.
Cancellation of the Boost function
Fig. 20
1 Press the Boost button or the - button to cancel the Boost function, and the cooking area
will return to the original setting.
2 Press the + and - buttons at once. The cooking area will turn o and the Boost function will
be automatically cancelled.
- This function can be activated in any cooking area.
02502_Placa Bolero Squad I 3000 _IM_YV_01220125.indd 6302502_Placa Bolero Squad I 3000 _IM_YV_01220125.indd 63 10/2/22 17:3610/2/22 17:36
To Next Page
Loading...
