11
BONGO SERIE M30 CONNECTED
- Make sure that the mains voltage matches the voltage stated
on the product marking and that the wall outlet is grounded
before charhing the device.
- Check the charger cord and casing regularly for visible
damage. Do not use the electric scooter if the charger cord,
socket, or structure are damaged, do not work properly or
Support Service immediately. If the power cord is damaged,
it must be replaced with a special cord or set to be supplied
cord is to be properly discarded.
- When you wish to disconnect the charger, pull from the plug,
never the cord. Do not handle the plug or the electric scooter
with wet hands.
- Remember that the wheel change is a complicated process
and it is advisable to be carried out by authorised personnel
caused by misuse will void the guarantee.
- Check the wheels pressure before each use. Remember that
a low pressure may reduce the battery life.
- Use this electric scooter only with the power supply provided
with the electric scooter and with original batteries from
Cecotec compatible with this model.
- WARNING: to recharge the battery, use only the power supply
unit provided with the appliance, reference YSW12E35.
- We recommend you charge the battery after every use and
before it runs out of battery completely.
- WARNING! Keep plastic packaging out of the reach of children
Battery safety instructions
- This electric scooter includes a lithium-ion battery.
To Next Page
Loading...
