cecotec BONGO M30 CONNECTED - Troubleshooting and Error Codes; Error Codes and Solutions

65
BONGO SERIE M30 CONNECTED
ENGLISH
5. Remove the plastic part from the upper part.
6. Remove the metal plate protecting the electronic components.
- 
appliance must be replaced with a new one. Note: The fully charged Bongo M30 Series
Connected electric scooter has a battery life of 120-180 hours. The built-in smart chip will
keep track of your charges and discharges. Damage caused by prolonged non-charging
is irreversible and is not covered by warranty. Once damaged, the battery cannot be
recharged (disassembly by non-professionals is prohibited as it may cause electric shock,
short circuit or even serious health accidents).
5. TROUBLESHOOTING
If the electric scooter displays any of the following error codes, you should not attempt to

may result in injury or serious malfunctions. Please contact the place where you bought the

an authorised technician and you must use only original spare parts.
P0: Battery overheating protection
P1: Display overheating protection
E0: Fault in the communication
E1: Accelerator failure
E2: Electric brake failure:
E3: Motor Hall sensor failure
E4: Motor failure
E5: Display failure
E7: Gyroscope failure
6. TECHNICAL SPECIFICATIONS
Reference: 07106
Product: Electric scooter M30 Connected series
Features Measuring units 
Dimensions Folded 
Unfolded 