cecotec BONGO M30 CONNECTED User Manual

64
ENGLISH
ORIGINAL MANUAL TRANSLATION
4. CLEANING AND MAINTENANCE
- Make sure the product is not plugged in the power supply or on before cleaning or
maintenance.
- 
-    
scooter.
- 
damage the electronic parts permanently.
- Never use pressurised water to clean the electric scooter.
- Do not try to repair the electric scooter on your own. In case it does not operate correctly
or it is damaged, please, contact Cecotec Technical Support Service.
- Self-tapping nuts and other fasteners may loosen their hold and need to be retightened.
- 
place it in a cool, dry place. Remember to recharge it every 60 days to protect the battery
from possible damage beyond the scope of the warranty.
- Disassembly of the wheels is complicated and improper assembly can cause instability
and malfunction.
Brake disc
You must check the brake discs are in perfect condition, matching the brake calliper, to set this
easily there is an Allen key included. Brake pads are consumable parts and must be replaced

Storage
- When not in use, store the scooter in a dry and ventilated place. Do not leave it outdoors

compromise the service life of the scooter and its battery.
- Charge it only if the room temperature is between 0ºC and 35ºC and store it at a temperature
between -10ºC and 35ºC.
Battery release
- Battery removal is complicated and may alter the functioning of the electric scooter: you
can contact an authorised repair entity if the product warranty is still valid. If the warranty

Cecotec Customer Service Department.
- 
1. Remove the anti-slip rubber from the top of the scooter.
2. Loosen the screws on the upper part of the scooter.
3. Remove the screws from the plastic side protectors.
4. Remove these protectors.

cecotec BONGO M30 CONNECTED Specifications

General

Brand	cecotec
Model	BONGO M30 CONNECTED
Category	Scooter
Language	English