Why cecotec Vacuum Cleaner won't connect to Wi-Fi?
If your Cecotec Vacuum Cleaner fails to connect to Wi-Fi, ensure it's in an area with a strong Wi-Fi signal. Reset your router and check for app updates. This vacuum cleaner supports only the 2.4 GHz, BLE 5.0 band. Also, disable your mobile data to improve the linking process.
What to do if my cecotec CONGA 8290 IMMORTAL ULTRA POWER X-TREME Vacuum Cleaner doesn't charge or return to base?
If your Cecotec Vacuum Cleaner can't charge or return to its base, try these steps: * Relocate the charging base to a spot free of obstacles. * Clean the charging terminals on both the base and the vacuum cleaner. * Ensure the vacuum cleaner is powered on. * If it's too far, move the vacuum cleaner closer to the base.
What to do if my cecotec CONGA 8290 IMMORTAL ULTRA POWER X-TREME Vacuum Cleaner doesn't clean efficiently?
If your Cecotec Vacuum Cleaner isn't cleaning efficiently, the tank might be full, so empty it and clear the high-efficiency filter if it is blocked. Also, the high-efficiency filter or the main brush might be blocked, so clean them.
How to fix cecotec CONGA 8290 IMMORTAL ULTRA POWER X-TREME Vacuum Cleaner always offline?
To resolve your Cecotec Vacuum Cleaner being always offline, ensure it's connected to a 2.4 GHz, BLE 5.0 network and is in an area with a strong Wi-Fi signal.
What to do if my cecotec CONGA 8290 IMMORTAL ULTRA POWER X-TREME Vacuum Cleaner makes strange noise?
If your Cecotec Vacuum Cleaner is making a strange noise, the main brush, side brush, or omnidirectional wheel might be blocked or tangled. Stop the vacuum cleaner and clean them.
What to do if my cecotec Vacuum Cleaner doesn't switch on?
If your Cecotec Vacuum Cleaner doesn't switch on or clean, ensure it's charged, as it won't work with a low battery. Also, it will not operate if the room temperature is below 0 ºC or above 40 ºC.
What to do if cecotec Vacuum Cleaner doesn't work properly?
If your Cecotec Vacuum Cleaner isn't working properly, try turning it off and then on again. If that doesn't work, reset the vacuum cleaner by pressing the side Reset button.
Why cecotec Vacuum Cleaner does not resume cleaning?
Your Cecotec Vacuum Cleaner will not resume cleaning if it is in Sleep mode, so ensure it is not in this mode. Also, it will not resume cleaning if it is manually placed on the charging base.
What to do if cecotec Vacuum Cleaner failed to connect to smartphone?
If the connection between your smartphone and the Cecotec Vacuum Cleaner fails, ensure both the vacuum cleaner and charging base are in an area with a good Wi-Fi signal. Reset the router and try the connection again.
Why cecotec CONGA 8290 IMMORTAL ULTRA POWER X-TREME Vacuum Cleaner does not carry out scheduled cleaning?
If your Cecotec Vacuum Cleaner isn't performing scheduled cleaning tasks, check if it's in Sleep mode and change the mode. Also, ensure the vacuum cleaner is properly connected to Wi-Fi, as scheduled cleaning won't work without a connection or with a low battery.
General| Model | CONGA 8290 IMMORTAL ULTRA POWER X-TREME |
|---|---|
| Type | Robot Vacuum Cleaner |
| Category | Vacuum Cleaner |
| App Control | Yes |
| Connectivity | Wi-Fi |
| Frequency | 50/60 Hz |
| Filter | HEPA |
| Filters | HEPA |
General safety precautions and cautions before operating the robot vacuum.
Step-by-step guide for setting up the main unit and its charging station.
Instructions for attaching and filling the water tank for mopping function.
Useful tips and advice for optimal use and performance of the vacuum cleaner.
Initial steps to take before the very first cleaning cycle for proper setup.
Automatic cleaning cycle with intelligent navigation and route planning.
Function to send the robot back to its charging base automatically.
Functionality to vacuum, scrub, and sweep simultaneously.
Clean specific, user-selected areas on the map with precise navigation.
Clean specific rooms selected on the map based on their order.
Intense cleaning of a single, specific point with maximum power.
Perform a deep, comprehensive cleaning of the entire house.
Program the robot to clean automatically at set times and days.
Instructions for cleaning the primary rotating brush to maintain efficiency.
Guide on how to clean the side brush for effective edge cleaning.
Steps to clean the dust and water compartment, ensuring proper drying.
How to clean the HEPA filter to prevent dust buildup and maintain suction.
Maintenance for the pre-filters to ensure optimal air flow.
How to clean sensors to prevent navigation errors and ensure safe operation.
Tips for battery longevity and instructions for battery replacement.
To Next Page