cecotec CONGA ASH 2000 COMPACT - Parts and Components; Before Use

42
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Blowing opening
2. Tank
3. Suction hole
4. Power switch
5. Handle
6. Close
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This device is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the ocial Cecotec Technical Support Service
immediately.
Box content
Fig. 2
1. Vacuum cleaner
2. High-eciency lter with metallic mesh
3. Aluminium nozzle
4. Narrow aluminium nozzle
5. Reinforced exible metal hose
6. Instruction manual
08118 Conga Ash 2000 Compactindd.indd 4208118 Conga Ash 2000 Compactindd.indd 42 19/6/23 17:4019/6/23 17:40