16
b. Exhaust lter
1. Rotate the cover of the exhaust lter counterclockwise to remove it (turn it clockwise to
lock it again).
2. You can clean the HEPA lter carefully with a dry cloth to eliminate the dirt that has
become stuck to the lter.
3. If the HEPA lter is too dirty, it is recommended to rinse it under running water and leave
it to dry over 24 hours before attaching it to the vacuum cleaner.
Note: All lters should be checked regularly for signs of damage, preferably after each cleaning
session. The lters must be replaced immediately if they are damaged.
5. TECHNICAL SPECIFICATIONS
Voltage: 220-240 V, 50-60 Hz
Power: 700 W
Noise level: < 78 dB
Working perimieter:8-9 m
To Next Page
Loading...
