CONGA GRASSHOPPER 300
118
ENGLISH
1. PARTS AND COMPONENTS
Figure 1:
1. Wheels
2. Display
3. Cutting knob
4. Handle
5. Charging station
6. Base tting screws
7. Cutting blades
8. Boundary wire
9. Boundary wire pegs
10. Power adapter
11. Distance guide
Figure 2:
1. Display
2. Power button
3. Start
4. Home
5. Ok
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the ocial Cecotec Technical Support Service
immediately.
Box content
- Robot lawn mower
- Charging station
To Next Page
Loading...