cecotec CONGA POPSTAR 4000 ULTIMATE PRO - Technical Specifications; Disposal of Old Electrical Appliances; Technical Support and Warranty

35
ENGLISH
CONGA POPSTAR 4000 ULTIMATE PRO
rinse it under running water and leave it to dry over 24 hours before attaching it to the vacuum
cleaner.
You can clean the mesh lter carefully with a dry cloth to remove the dirt stuck to the lter.
Fig. 6
High-efciency lter
Rotate the cover of the exhaust lter counterclockwise to remove it (turn it clockwise to lock
it again).
You can clean the high-efciency lter carefully with a dry cloth to remove the dirt stuck to
the lter.
If the high-efciency lter is too dirty, it is recommended to rinse it under running water and
leave it to dry over 24 hours before attaching it to the vacuum cleaner.
Fig. 7
5. TECHNICAL SPECIFICATIONS
Product reference: 05559
Product: Conga PopStar 4000 Ultimate Pro
800 W, 220-240 V~, 50-60 Hz
Made in China | Designed in Spain
6. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), species that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimise the recovery and recycling
of the materials they contain, and reduce the impact on human health and
the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation to dispose
of the appliance correctly.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
7. TECHNICAL SUPPORT AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given