G
gordonandrewAug 7, 2025
What to do if my cecotec CONGA 4000 CARPET&SPOT CLEAN Vacuum Cleaner does not vacuum well or the suction is too weak?
- KKimberly WalkerAug 7, 2025
If your Cecotec Vacuum Cleaner isn't vacuuming properly or the suction seems weak, there are several possible causes and solutions: * Ensure the power button is in the On position. * Empty the waste-water tank if it's full, as this can activate the float valve. * Check the hose for cracks, breaks, or clogs. * Make sure the waste-water tank is correctly installed. * Clean or replace the air inlet sponge if it's blocked.