What to do if my cecotec CONGA 4690 ULTRA Vacuum Cleaner robot does not start?
If your Cecotec Vacuum Cleaner robot isn't starting, it might be due to a low battery. Allow the robot to charge fully before attempting to operate it. Also, ensure the room temperature is suitable; the robot will not start if the temperature is below 0 ºC or above 50 ºC. Operate the robot in a room where the temperature is within the specified range.
General| Model | Conga 4690 Ultra |
|---|---|
| Virtual Map | Yes |
| Room Selection | Yes |
| Restricted Areas | Yes |
| Scheduled Cleaning | Yes |
| Auto Recharge | Yes |
| Charging Time | 4 hours |
| Dust Container Capacity | 0.3 L |
| Control | App and Voice Control |
| Filtration System | High-efficiency filter |
| Navigation Technology | Laser |
| Operating Modes | Auto, Spot, Manual |
| Mop Function | Yes |
| Voice Control | Yes (Alexa & Google Assistant) |
| Connectivity | Wi-Fi |
| Virtual Walls | Yes |
Lists the main components of the robot itself.
Details the various sensors integrated into the robot for navigation and operation.
Lists parts related to the Wet&Dry tank and dust handling systems.
Details the parts of the robot's charging base.
Lists components for the mop functionality.
Instructions for taking the robot out of the box and checking its condition.
Guide for connecting the charging base and placing the robot.
Explains the meaning of different LED indicator lights on the robot.
Instructions for installing the water and dust tanks.
Steps for performing the first cleaning cycle and initial mapping.
Explains robot buttons, Auto mode, Edge mode, and Back home function.
Lists and describes functions controllable via the remote, including scheduling and power levels.
Instructions for pairing the remote control with the robot.
Explains the meaning of various light indicators for robot status and functions.
Highlights app benefits and guides through setup and Wi-Fi connection.
Provides solutions for common Wi-Fi connection issues.
Details various cleaning modes controllable via the mobile app.
Explains modes like Restricted Area, Twice, and Final Cleaning.
Instructions for removing, cleaning, and replacing the main brush.
Guides for cleaning the silicone and Jalisco brushes.
Steps for emptying and cleaning dust and wet&dry tanks.
Instructions for cleaning the high-efficiency filter and free-fall sensors.
Rules for using the provided battery and charging base.
Advice on storing the robot and battery when not in use.
Addresses problems like startup failures, charging issues, noise, and cleaning efficiency.
Solutions for Wi-Fi, scheduled task, and mode operation issues.
Details the product reference, model, and power requirements.
Lists battery capacity, frequency bands, and transmission power.
Information on the proper disposal of the appliance according to WEEE regulations.
Explains the product's warranty period, terms, and exclusions.
Provides contact information for technical support.
To Next Page