cecotec Cumbia - Cleaning; Milk System Cleaning

POWER MATIC-CCINO 9000 SERIE BIANCA / NERA | 31
ENGLESK
crete instructions provided by Cecotec.
Light
Choose if you want the coee spout LED light to be always on, o or only on
when coee or hot drinks are being dispensed.
4. Cleaning
Unplug the cable from the power supply before start the cleaning. Do not
immerse the appliance in water nor any other liquid during the cleaning.
Use a soft, dampened cloth to clean the outer part of the device.
The lack of maintenance and cleaning of the product may cause a deterio-
ration on its surface and aect its lifespan.
Do not use strong detergents, gasoline, powder abrasives or metal brushes
to clean the device.
Store the appliance in a safe, dry and clean place when it is not going to be
used for a long time.
Clean both the visible parts of the machine and the area beneath it in order
to remove all residues.
(Fig 26)
Cappuccinatore (Fig. 27)
After dispensing milk, the coee maker will display the below warning.
Place the milk frother as shown on the drawing.
Press Ok to activate the milk frother’s cleaning cycle.
Warning: During the cleaning cycle, steam and hot water will be discharged
through the milk frother and the coee spout. Do not touch any of these
elements until the cleaning cycle is completed.
Milk frother (1) (Fig. 28)
Insert the milk frother into the machine.
Place the milk frother inside a glass of water and place another one below
the milk dispenser.
Press the Milk icon to start cleaning.
Once the cycle is completed, empty the container and repeat the cleaning
cycle until no milk rests are observed.
Milk frother (2) (Fig. 29)
Press both sides of the milk frother and take it out from the coee spout.
Introduce the milk frother in a glass of clean water.