cecotec Cumbia - Brewing Unit and Grinder Maintenance

32 | POWER MATIC-CCINO 9000 SERIE BIANCA / NERA
ENGELSK
Clean the wholes in the back of the device with the cleaning brush.
Reinstall the milk frother back to its position.
Note: The device will notify when this process is necessary.
Cleaning of the milk frother (3)
When “Cleaning of the milk system” is displayed in the screen, press Ok. This
will be displayed after having used milk.
Place the milk frother as shown on the second drawing.
Press Ok to start the milk system automatic cleaning.
Fig. 30
Note: During the cleaning process, both the milk frother and the coee out-
let will emit hot water and steam. Do not remove nor touch any part of the
device when the cleaning is over.
Brewing unit (1) (Fig. 31)
Access the Settings menu and press Cleaning icon.
Tap on the Processor icon.
Pour cleaning agent into the brewing unit through the ground coee inlet.
Press Ok to activate the cleaning cycle.
The machine will return to standby mode once the cleaning is completed.
Cleaning of the brewing unit (2)
Open the right door.
Remove the waste container.
Remove the brewing unit by pressing the tab with your thumb and pulling
outwards. Rinse it with abundant hot water.
Use the brush to remove possible coee remains.
Insert the brewing unit back to its position. Wait until your hear a click to
make sure it is placed correctly.
Fig. 32
it is suggested to clean the grinder every 350 coees. On Settings, select
Factory settings and press “coee meter” and it will display the number of
coees served.
In order to clean the grinder, follow these steps:
Open the right door.
Remove all the coee beans from the deposit.
Restart the coee machine by pressing the On/o button twice. (g. 2- g.
3)
When the image of the coee machine is displayed on the screen, press the
top left side until the submenu pops up.
Remove the waste tank and the brewing unit to clean them manually. (g. 5)