cecotec FORCECLIMA 12600 SoundLess Heating - Page 36

FORCECLIMA 12600 SOUNDLESS HEATING FORCECLIMA 12600 SOUNDLESS HEATING
7170
ENGLISH ENGLISH
are installed.
- Ventilation machinery and outlets can be properly operated and are unobstructed.
- If an indirect cooling circuit is used, the secondary circuit must be checked for refrigerant
presence.
- 
corrected.
- The components or refrigerant piping are installed in a position where they are not
susceptible to exposure to any substance that may corrode the refrigerant-containing
components, unless the components are made of materials that are inherently resistant
to corrosion or are properly protected against it.
1.9. Verication of electrical devices
Repair and maintenance of electrical components should include initial safety checks and
component-inspection procedures. If there is a fault that may compromise safety, then no
power supply should be connected to the circuit until the fault is satisfactorily dealt with. If
the fault cannot be corrected immediately, but continued operation is necessary, a suitable

as to inform all parties.
During initial safety checks, make sure
- 
- that no live wiring or electrical components are exposed while loading, recovering, or

- that there is continuity in the earth connection.
2. Repair of sealed components
- During the repair of sealed components, all power supplies should be disconnected from


operating form of leak detection should be placed at the most critical point to warn of a
potentially hazardous situation.
- Particular attention must be paid to the following to ensure that, when working on electrical

damage to cords, an excessive number of connections, terminals not conforming to the

- Ensure that the instrumentation is securely mounted.
- Ensure that seals or sealing materials have not degraded until no longer being useful to


NOTE:            

The work must be carried out in accordance with a controlled procedure to minimise the risk of

1.3. General workspace
All maintenance personnel and others working in the area should be briefed on the nature

workspace should be divided into sections. Ensure that conditions within the workspace are

1.4. Refrigerant verication
The area should be checked with an appropriate refrigerant detector before and during



1.5. Presence of re extinguishers
              
          

1.6. Absence of ignition sources
No person carrying out work related to a refrigeration system involving the exposure of piping
      

cigarette smoking, should be kept far enough away from the installation, repair, pick-up, and



1.7. Ventilation
 
or carrying out any work at high temperature. Proper ventilation must be kept at all times
during work. Ventilation should safely disperse any refrigerant released and preferably expel
it externally to the atmosphere.
1.8. Verication of refrigeration equipment
         

times. In case of doubt, refer to the manufacturer’s technical department for assistance.

- The load size is in accordance with the size of the room where refrigerant-containing parts