cecotec FORCECLIMA 9050 - Fan Mode Operation; Sleep Mode Operation; Timer Functionality

ENGLISH
32 FORCECLIMA 9050
e) Fan mode
• Press the MODE button on the appliance (7) or the button on the remote control
to select “fan” mode. The FAN indicator will light up. Only the fan operates. There is no air
conditioning or dehumidication.
• Press the SPEED button (2) on the appliance or the button on the remote control
to set high or low fan speed.
The temperature and sleep mode cannot be set during operation in “fan” mode
f) Sleep mode (sleep)
• In sleep mode, the appliance increases the temperature set by a total of 2 °C and generally
runs at low fan speed. If you have selected sleep mode, the temperature set is increased
by 1 °C after 1 hour, by another 1 °C after another hour and then remains constant.
• Select “COOL” mode. Sleep mode is only possible in “COOL” mode.
• Press the SLEEP button (6) on the appliance or the button on the remote control
(C) to switch to sleep mode. The fan speed is set to low and cannot be changed. The SLEEP
indicator lights up.
• Press the SLEEP button (6) on the appliance or the button on the remote control
(C) to exit sleep mode.
• The sleep mode only works in “COOL” mode. Sleep mode is automatically switched off
when the condensate tank is full (the WATER FULL lamp lights up) or when the appliance
is switched to standby mode.
g) Timer
It is possible to switch the appliance on and off automatically. You can set the desired operating
time before the appliance turns automatically off from standby mode or until it switches off
while the appliance is on.
Automatic switching on in standby mode
• The appliance is switched off and in standby mode.
• Press the TIMER button (1) on the appliance or the button (H) on the remote
control to set the desired time interval (1 - 24 hours).
• Press the TIMER button (1) on the appliance or the button (H) on the remote
control, several times if necessary, until the desired time is set. Once the time has been set,
the display (4) switches back to the temperature display after a few moments.
• To view a set time, briey press the TIMER button (1) on the appliance or the
button (H) on the remote control. The set time will be displayed. The display (4) switches
back to the temperature display after a few moments.
• The appliance switches on automatically after the preset time has elapsed.