cecotec FORCECLIMA 9050 - Troubleshooting Common Issues

ENGLISH
35FORCECLIMA 9050
in the plug holder.
• Remove all air hoses etc. and store them in such way that they are protected and dry.
• Cover the appliance and store it in a dry place. Use the original packing material for this, if
necessary, to protect it from the environment.
• Remove the batteries from the remote control and store them safely or recycle them
according to the local regulations.
7. TROUBLESHOOTING
Do not repair or disassemble the air conditioning by yourself. Unqualied reparations will void
the warranty, and may cause damage to users or their properties.
Problems Reasons Solutions
The air
conditioner
does not work.
There is no electricity. Turn it on after connecting it to a socket with
electricity.
The overow indicator displays
“F L”.
Drain water inside.
The room temperature is too low
or too high.
Recommend to use the machine in places
where temperature is between 7-35 ºC (44-
95 ºF).
In cooling mode, the room
temperature is lower than the set
temperature.
Change the set temperature.
In dehumidication mode, the
ambient temperature is low.
The machine is placed in a room with a room
temperature above 17 ºC (62 ºF).