• The fan must be properly grounded to avoid the risk of
electric shocks.
• Never mount the fan in a moist or wet room.
• Be careful when working near the rotating blades.
• This appliance must be installed in accordance with the
national electrical installation regulations.
WARNING: In order to ensure your children’s’ safety, please
keep all packaging (plastic bags, boxes, polystyrene etc.) away
from their reach.
IMPORTANT: Shut off the main electric switch during installation
or maintenance. It is recommended to switch off the plug of the
automatic switch before the fan (It is not enough to switch off)
WARNING: This product is designed for household only, do not
use it for commercial or industrial purposes.
3. BEFORE USE
Carefully open the ceiling fan’s box, take all the components out and place them on a cloth or soft
surface to avoid damage. Do not lay the motor’s box on its sides, the housing could be damaged.
Before starting the assembly, make sure all the parts and components are included.
4. PRODUCT ASSEMBLY
WARNING: to avoid electric shocks, turn the household power supply off before starting the cei-
ling fan installation.
1. Remove the 4 screws that fix the canopy and the mounting bracket and separate these
2 pieces.
2. Remove the pin and the screw that fix the hanging ball and the downrod and separate
both pieces.
3. Pass the fan body’s cables through the canopy’s hole.
To Next Page
Loading...
Need help?
General