ENGLISH
24 HIDROBOOST 1400
4. Shut down
• Turn the motor off.
• Turn the water supply off.
• Once the power and water supply are turned off, press the trigger to depressurize the
device.
WARNING:
• Do not turn the water supply off before turning the motor off. Serious damage could occur
to the pump and or motor.
• Do not disconnect the high-pressure hose from the machine while the device is
pressurized. To depressurize, turn motor off, turn water supply off and squeeze gun
trigger 2-3 times.
TIPS FOR EXTENDING THE PRODUCT’S SERVICE LIFE
• Never operate unit without water.
• Do not use the device with hot water.
• Before adjusting the pulverizing nozzle’s pressure (high-to-low or low-to-high) release
trigger.
• Never operate.
5. CLEANING AND MAINTENANCE
• The machine shall be disconnected from its power source by removing the plug from the
socket-outlet during cleaning or maintenance.
• Do not store the pressure washer outdoors or where it could freeze. The pump could be
seriously damaged.
6. TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Smoke comes out
from the device.
Overheating, overload or
damaged motor.
Turn the device immediately of
and contact the Technical Support
Service of Cecotec.
To Next Page
Loading...
