EasyManua.ls Logo

cecotec Hydroboost 2400 AdvanceClean - Page 69

cecotec Hydroboost 2400 AdvanceClean
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HYDROBOOST 2400 ADVANCECLEAN
69
ENGLISH
How to avoid damaging surfaces
A surface is damaged when the water impact force is greater than the hardness of the
surface. The impact force will vary according to the settings mentioned above. Never use a
direct jet on surfaces susceptible to damage. Avoid spraying windows with the direct jet, as
they may break.
The best way to avoid damaging surfaces is to follow these steps:
1. Before pressing the trigger, move the spray nozzle to the fan spray position.
2. Follow the distance and angle instructions mentioned above.
3. Vary the angle of the jet, the type of jet, and the distance from the surface to be cleaned
until ecient cleaning is achieved without damaging the surface.
Attachments
3D TurboFlip nozzle
The 3D TurboFlip nozzle, also dened as a rotating nozzle, is a very eective accessory to
signicantly reduce cleaning time. It must be used to clean in Turbo mode, explained in the
previous section. This accessory is attached to the lance.
Soap bottle
This model includes an accessory to apply soap while in operation. The use of soaps may
reduce the cleaning time and make dirt removal easier. Some soaps have been designed for
use in pressure washers and specic cleaning tasks. The use of thick soaps, like the soap
used with tableware, can clog the injection system with chemical products.
Note
Soaps work better when applying them on spray mode.
The chemical action combined with high-pressure rinses in concentrated mode is very
eective. In vertical surfaces, apply soap from bottom to top. This will prevent soap from
dripping down and creating stains. High-pressure rinses can also be carried out from bottom
to top. With stains especially dicult to remove you may need to use a brush along with soap
and high-pressure rinses. Follow the instructions in the next section to use this accessory.
Fig. 7
Anti-impurities lter
This model includes a transparent male connector with a lter that can be assembled with
the hose to prevent the dust from getting through. This accessory is inserted into the water
outlet (6).
08139_HydroBoost 2400 AdvanceClean.indd 6908139_HydroBoost 2400 AdvanceClean.indd 69 18/11/22 9:5718/11/22 9:57

Table of Contents