cecotec POWER ESPRESSO 20 BARISTA MINI - Parts and Components

48
ENGLISH
1. PARTS AND COMPONENTS
1. Water tank cover
2. Water tank
3. Steam button
4. Main body
5. Steam pipe and nozzle
6. Steam pipe handle
7. Cup-warming tray
8. Pressure gauge
9. Single coee switch/indicator
10. Steam heating switch/indicator
11. On/O switch/indicator
12. Double coee switch/indicator
13. Water outlet
14. Measuring spoon
15. Single coee lter
16. Double coee lter
17. Filter holder
18. Drip tray cover
19. Drip tray
20. Float
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This device is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the ocial Cecotec Technical Support Service
immediately.
- Remove the silicone cap from the water tank before using the machine.
- Clean all detachable components.
01982_PowerExpresso_20_Barista_Mini_RP_01230628.indd 4801982_PowerExpresso_20_Barista_Mini_RP_01230628.indd 48 30/6/23 8:1130/6/23 8:11