cecotec POWER ESPRESSO 20 BARISTA MINI - Indicator Lights Guide

52
ENGLISH
3. Place a cup under the steam nozzle, allow the steam nozzle to be inserted into the liquid.
4. Turn on the steam selector and wait for the steam to come out.
5. Turn o the steam selector when the desired temperature is reached, now the steam
stops.
Note: clean the steam nozzle immediately after use to prevent the formation of deposits
in the milk. Note: the diameter of the glass must not be less than 70 ± 5 mm. Because it is
heated by steam to prevent overows or spillage of liquids when steam is released.
Note: if you want to make coee or get hot water after using the steam function, the single,
double and steam icons will ash until the heating element reduces its temperature.
Warning: high hot water outlet temperature when in use.
Advice on indicators
On/o
Display
Single-coee
indicator
Double-
coee
indicator
Steam
indicator Cause Solution
Indicator
ashes for 1s
Indicator
ashes for 1s
Indicator
ashes
for 1s
Indicator
ashes for 1s
When
connecting
the plug
/
Light indicator
on
Flashing light
indicator
Flashing
indicator
light
Flashing
indicator light
Coee and
hot water
are being
preheated
/
Light indicator
on
Light indicator
on
Light
indicator
on
Lights
o
Coee and
hot water
preheating
completed
/
Lights
o
Light on
Lights
No
Lights
o
Brewing a cup
of coee or
water
/
01982_PowerExpresso_20_Barista_Mini_RP_01230628.indd 5201982_PowerExpresso_20_Barista_Mini_RP_01230628.indd 52 30/6/23 8:1130/6/23 8:11