cecotec SF18650NR-22 - Device Status and Charging

SCOBA 2100 TWICE MAX
42
ENGLISH
2. To remove, pull the accessory while holding the main body rmly.
Accessory for corners and furniture. Fig. 3
This accessory allows cleaning furniture without damaging it and reaching less accessible dirt
in corners.
1. To install the accessory for corners and furniture to the main body, align the two parts so
that they t together until it snaps into place.
2. To remove, pull the accessory while holding the main body rmly.
Assembling the vacuuming tube and the motorised dual brush. Fig 4
- To install the motorised brush into the vacuuming tube, align both of them making sure
the tab on the motorised brush matches the guides on the tube, and introduce one into the
other until they are rmly xed.
- To disassemble them, press the motorised-brush release button, and pull from the
vacuuming tube while you hold the vacuuming brush head.
Motorised brush for upholstery. Fig. 5
- To install the motorised brush into the main body, align both of them making sure the tab
on the motorised brush matches the guides on the main body, and introduce one into the
other until they are rmly xed.
- To remove, press the motorised brush release button and pull it out of the main body.
Indicator light. Fig. 6
- When the vacuum cleaner is charging, the indicator will light up and keep ashing.
- When the vacuum cleaner is fully charged, the indicator will stop ashing and light up
steady.
- When using the vacuum cleaner, the indicator will stay lit.
- When the vacuum cleaner’s battery is low, the indicator will ash.
Charging the vacuum cleaner. Fig. 7
Make sure the vacuum cleaner is switched o.
1. Plug the adapter into a socket and the vacuum cleaner.
2. An indicator light will light up and keep ashing once the adapter is connected to the
vacuum cleaner.
- To ensure that the device is always ready for use, we recommend you leave the device
charging when not in use.
- It’s normal for the adapter to become warm during charging.