Cedar DIS-IP05 - User Manual

TORQUE MEASUREMENT
INSTRUCTION MANUAL
Digital Torque Tester
Models:
DIS-IP05, DIS-IP5, DIS-IP50, DIS-IP200 & DIS-IP500
2 YEAR WARRANTY (RESTRICTIONS APPLY)
Imada, Inc. warrants its products to the original purchaser to be free from defects in
workmanship and material under normal use and proper maintenance for two years (one
year for adapters, attachments, batteries, and cables) from original purchase. This warranty
shall not be effective if the product has been subject to overload, shock load, misuse,
negligence, accident or repairs attempted by others than Imada, Inc.
During the warranty period, we will, at our option, either repair or replace defective
products. Please call our customer service department for a return authorization number
and return the defective product to us with freight prepaid.
The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY, and we hereby
disclaim all other warranties, express, statutory or implied, applicable to the products and/or
software, including but not limited to all implied warranties of merchantability, fitness, non-
infringement, results, accuracy, security and freedom from computer virus. In no event shall
Imada, Inc. and/or its affiliated companies be liable for any incidental, consequential or
punitive damages in connection with the use of its products and/or software.
03/09
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Summary

Warranty Information

2 Year Warranty Details

Details the warranty terms and restrictions for the torque tester.

Digital Torque Tester Specifications

Model Specifications and Equipment

Lists models, their torque ranges, and included accessories.

Safety Precautions

Outlines essential safety guidelines for operating the tester.

Physical Dimensions

DIS-IP Unit Dimensions

Provides a dimensional diagram and measurements for the DIS-IP series.

Communication and Data Output

Comport Signal and Output Formats

Explains serial communication settings and data output structures.

Tester Controls and Display

Control Panel Overview

Details the functions of each button and the LCD display on the tester.

General Operation Guide

Connecting Sensor and Selecting Units

Instructions on connecting the sensor and choosing measurement units.

Measuring Modes Explained

Describes Real Time, Peak, Peak Down, and Continuous output modes.

PC Connectivity and Programming

USB Virtual COM Port Setup

Guides on connecting the tester to a PC via USB and setting up drivers.

Tester Programming Functions

Explains how to set high/low setpoints, PdLO, CLO, and auto zero.

Advanced Settings and Features

Beeper and Data Memory

Configures beeper settings and manages stored measurement data.

Data Management and Power

Covers downloading, clearing data, auto power off, and battery status.

System Reset and Low Battery

Procedures for system reset and understanding low battery indicators.

Cedar DIS-IP05 Specifications

General

Brand	Cedar
Model	DIS-IP05
Category	Test Equipment
Language	English