USER – MAINTENANCE INSTRUCTIONS
REMOVING AND CLEANING WHEELS
1 Turn off the unit.
2 Turn the unit upside down.
3 Pull the wheels gently upwards until they come out.
4 Clean hairout of the wheel axis.
5 Use a small brush to remove dirt out of the wheel profile.
6 Replace wheels by gently pushing them back into the coupler until it clips.
Wheels do not need to be cleaned after each use. However, regular cleaning is recommended
to avoid excessive build up of hair that could damage the robot.
REMOVING AND CLEANING WHEELS
11
1 2
3 4
To Next Page
Loading...