Need help?Do you have a question about the Ceecoach 2 and is the answer not in the manual?
General| Weight | 150 grams |
|---|---|
| Microphone | Yes |
| Operating Voltage | 3.7 V |
| Bluetooth Range | 10 meters |
| Charging Time | 2 hours |
| Bluetooth | Bluetooth |
Charge both devices and activate CEECOACH pairing mode by pressing the talk button until the LED flashes.
Turn on Jabra BT 2047 and initiate pairing by pressing the Answer/End button until the Bluetooth indicator flashes blue.
Successful pairing is indicated by the CEECOACH flashing in its original color.
Charge CEECOACH and Jabra Steel, then activate CEECOACH pairing mode by pressing the talk button until the LED flashes.
Turn on Jabra Steel and activate pairing mode for 3 seconds until the Bluetooth indicator flashes blue.
Successful pairing is indicated by the CEECOACH flashing in its original color.
Keep successfully paired CEECOACH and headset together; mark them for identification to prevent mix-ups.
Pair devices sequentially, one CEECOACH with one headset at a time, repeating steps for each new pair.
Verify all CEECOACH devices have the same software version for optimal pairing, updating older models if necessary.
To Next Page