EasyManua.ls Logo

cefar PRIMO EASY - Technical Specifications and Data

cefar PRIMO EASY
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TECHNICAL DATA
CEFAR PRIMO is a nerve stimulator
(TENS) with two independent channels
and 9 pre-set treatment programs. The
stimulator has buttons for setting of
program and amplitude for each channel.
An automatic key lock is activated 20 sec.
after the amplitude has been set.
CEFAR PRIMO EASY is a nerve
stimulator (TENS) with two non-
independent channels and 3 pre-set
treatment programs. The stimulator has
buttons for setting of program, amplitude
and timer. An automatic key lock is
activated 20 sec. after the amplitude has
been set.
The stimulators run on either two non-
rechargeable 1.5 V AA batteries or two
rechargeable batteries, recharged in a
separate charger. Treatment with electrical
stimulation requires the stimulation
current to penetrate the resistance of the
skin and the electrode, about 1500 ohms.
CEFAR PRIMO and CEFAR PRIMO
EASY can penetrate this resistance and
maintain a current of up to 60 mA. With
a change in load from 100 to 1500 ohms,
the stimulation current changes less than
5% from the set value.
24
CEFAR PRIMO CEFAR PRIMO EASY
No. of channels 2 (independent) 2 (non-independent)
Constant current ohm Up to a resistance of 1500 ohm Up to a resistance of 1500
Stimulation current/channel 0-60 mA 0-60 mA
Wave form Asymmetrical biphasic pulse, 100% compensated
No. of pre-set programs 93
Stimulation forms Conventional Conventional
Burst Burst
Modulated pulse duration Modulated pulse duration
Mixed frequency - - -
Pulse duration See program p. 19. See program p. 21.
Frequency See program p. 19. See program p. 21.
Timer See program p. 19. 30 minutes/OFF
Environment for
storage, use and shipping Temperature 10º C–40º C • Air humidity 30%–75% • Air pressure
700hPa–1060 hPa
Power source 2 pcs 1.5 V AA non-rechargeable or 2 pcs 1.2 V AA rechargeable
batteries
Current consumption for
one channel, 80 Hz, 30 mA 100 mA 100 mA
I r.m.s. max/channel 10 mA 10 mA
Size 120 x 53 x 33 mm 120 x 53 x 33 mm
Weight c. 185 g c. 185 g
Key to the symbols Read the operating instructions prior to use. Patient part type BF – Body Floating.
Complies with MDD 93/42/EEC requirements. Notified body SEMKO AB.
A reference library is available on Cefars home page, www.cefar.se.
Primo inlaga nio språk 04-02-19 15.30 Sida 24

Table of Contents

Related product manuals