Celexon Professional Plus - Step 3: Retract Screen; Step 4: Stop Screen

10
STEP 3: RETRACT THE SCREEN (FIG. 3)
Slide the switch upwards. The screen
retracts and stops automatically at
the housing or the upper end point.
Make sure that no objects or persons
obstruct the retraction path of the of
the screen.
STEP 4: STOP THE SCREEN
To stop the screen manually, slide the switch to the centre position.
To stop the screen manually, slide the switch to the centre position.It is possible to set the stop
points. Please request the instructions for this procedure from your specialist dealer or directly via
www.celexon.com