Celleration Ultramist - Page 4

PREPARING THE ULTRAMIST™ SYSTEM
Allowthesalinetorunthroughtheapplicatortubingunl
salineisnotedatthedistalp.Closethetubingclamp.
10
Ifulizingtheadjustablehook,posiongeneratornearthe
edgeofaatworksurface(i.e.tabletoporcart).Extend
thehookbeyondtheedgeandaachthesalinebag.
Adjustposionasnecessarysothesalinebaghangsfreely
and the generator is stable.
11
The display screen will ask for the saline pump to be
loaded. Open the saline pump door.
12
Loop the applicator tubing from the saline bag through
thesalinepumpfromletoright,centerontubing
guides, and close the pump door. Leave enough tubing
toallowthesalinebagtohangfreelywiththemajorityof
the tubing between the pump and treatment wand.
13
Openthetubingclamp.Salinewillnotowunlthe
treatmenton/obuonisiniated.
14
The system is now set up and ready for treatment.
Note: Saline will only ow in conjuncon with ultrasound
delivery.
-- Total Treatment Time
Number of --
Wounds
-- Treatment Time
for Wound 1
PL-61044_B 4
Remove saline bag from outer packaging. Remove the
protecvecoverfromapplicatortubingspikeandfrom
saline bag port. Insert spike fully into saline bag.
9
Insert applicator tubing into the treatment wand tubing
channelandaachthetubingcliptothetreatmentwand
cable. Place treatment wand in cradle once completed.
8
ULTRAMIST™ SYSTEM INSTRUCTIONS FOR USE
Tubing Guides