To Next PageTo Next PageWhat to do if my Celli Brave 60 ES does not deliver water?
If your Celli Chiller isn't dispensing water, first ensure the main water tap is turned on. Next, check the water supply connection tube for any crushing or obstructions. Finally, verify that the plug is well inserted into the electricity supply.
Why my Celli Brave 60 ES Chiller dispenser does not start up?
If your Celli Chiller dispenser isn't starting up, first check that power is present. If the power supply is okay, it may be a thermostat failure, and you should call an authorised technician.
How to fix the issue if Celli Brave 60 ES Chiller dispensed product is not cold enough?
If the dispensed product from your Celli Chiller isn't cold enough, the ice bank may have run out; wait until it has fully reformed. Also, check that the incoming water temperature is lower than 32°C. If these steps don't resolve the issue, it could be a soda recirculation pump malfunction or inadequate insulation on the python, in which case you should call an authorised technician.
What to do if my Celli Brave 60 ES does not deliver sparkling water?
If your Celli Chiller isn't dispensing sparkling water, first check if the CO cylinder has run out and replace it if necessary. Also, verify that the CO cylinder valve is open. If the issue persists, it may be due to an electronic control unit malfunction or pump failure, requiring you to call an authorised technician.
Why is my Celli Chiller only dispensing water?
If your Celli Chiller is only dispensing water, the syrup tanks may have run out; replace them with new ones. Another possibility is that the syrup lines are obstructed; sanitise them as indicated in the relevant paragraph. Finally, check if there is no CO2; if so, replace the CO cylinder.
Why Celli Brave 60 ES cooling unit operates continually, and the water delivered is warm?
If the cooling unit of your Celli Chiller operates continually, and the water delivered is warm, it may be due to a refrigerant gas leak, and you should call an authorised technician.
Why Celli Brave 60 ES cooling unit operates continually, and the water freezes?
If the cooling unit of your Celli Chiller operates continually, and the water freezes, it could be a thermostat failure, and you should call an authorised technician.
How to fix a noisy water pump in my Celli Brave 60 ES Chiller?
If the water pump of your Celli Chiller is noisy, check that water is reaching the appliance.
Defines correct appliance usage, forbidden uses, and safety warnings for operators and users.
Details potential dangers associated with CO2, electricity, gas cylinder position, and refrigerant.
Outlines precautions for authorized staff, electrical requirements, sanitization, and low temperatures.
Explains the cooling unit, ice bank, and heat exchange process for dispensing drinks.
Covers the energy saving unit, standard/optional functions, and alarm management.
Specifies suitable ambient temperatures and essential electrical connection standards.
Provides instructions and safety warnings for connecting CO2 and final electrical connections.
Guides on adjusting CO2 pressure, checking for leaks, and adjusting dispensing valve ratios.
Details the initial sanitization and priming steps required before first use.
Guides on connecting power, turning on the machine, and waiting for optimal operation.
Provides sanitization procedures for dispenser lines and cleaning/checking the liquid check valve.
Provides a table of common issues, probable causes, and recommended remedies.
General