To Next PageTo Next PageWhat to do if my Celli Chiller does not deliver water?
If your Celli Chiller isn't dispensing water, first ensure the main water tap is turned on. Next, check the water supply connection tube for any crushing or obstructions. Finally, verify that the plug is well inserted into the electricity supply.
Why my Celli Brave 90 ES dispenser does not start up?
If your Celli Chiller dispenser isn't starting up, first check that power is present. If the power supply is okay, it may be a thermostat failure, and you should call an authorised technician.
How to fix the issue if Celli Chiller dispensed product is not cold enough?
If the dispensed product from your Celli Chiller isn't cold enough, the ice bank may have run out; wait until it has fully reformed. Also, check that the incoming water temperature is lower than 32°C. If these steps don't resolve the issue, it could be a soda recirculation pump malfunction or inadequate insulation on the python, in which case you should call an authorised technician.
What to do if my Celli Chiller does not deliver sparkling water?
If your Celli Chiller isn't dispensing sparkling water, first check if the CO cylinder has run out and replace it if necessary. Also, verify that the CO cylinder valve is open. If the issue persists, it may be due to an electronic control unit malfunction or pump failure, requiring you to call an authorised technician.
Why is my Celli Chiller only dispensing water?
If your Celli Chiller is only dispensing water, the syrup tanks may have run out; replace them with new ones. Another possibility is that the syrup lines are obstructed; sanitise them as indicated in the relevant paragraph. Finally, check if there is no CO2; if so, replace the CO cylinder.
Why Celli Brave 90 ES cooling unit operates continually, and the water delivered is warm?
If the cooling unit of your Celli Chiller operates continually, and the water delivered is warm, it may be due to a refrigerant gas leak, and you should call an authorised technician.
Why Celli Brave 90 ES cooling unit operates continually, and the water freezes?
If the cooling unit of your Celli Chiller operates continually, and the water freezes, it could be a thermostat failure, and you should call an authorised technician.
How to fix a noisy water pump in my Celli Brave 90 ES?
If the water pump of your Celli Chiller is noisy, check that water is reaching the appliance.
Details potential dangers including CO2, electricity, gas cylinders, and refrigerants.
Explains the meaning of safety symbols (Danger, Warning, Caution) used throughout the manual.
Explains how the cooling unit and hydraulic system function to dispense drinks.
Details the control unit and user interface for managing machine functions and alerts.
Provides specifications such as power supply, dimensions, refrigerant, and capacity for different models.
Specifies requirements for placing the machine to ensure proper ventilation and operation.
Outlines necessary electrical connections, earthing, and safety breaker requirements.
Covers the procedures for connecting water, syrup, CO2, and electrical supplies.
Details steps for preparing the machine, including overflow connection and filling the water tank.
Describes how to connect the machine to the water supply system and filter.
Provides instructions for connecting the CO2 cylinder and pressure reducer.
Details the final steps for connecting the machine to the electrical power supply.
Explains how to set the correct CO2 pressure for the machine and syrup lines.
Outlines the procedure for detecting leaks in the water, CO2, and syrup circuits.
Details how to calibrate the water-syrup ratio at the dispensing valves.
Lists daily checks and procedures required for consistent operation.
Step-by-step guide on how to safely change the CO2 gas cylinder.
Provides procedures for sanitising the machine's product lines using recommended solutions.
General