6
1. Always disconnect the cord from the electrical outlet before cleaning your fan.
2. Dust may be removed by using a vacuum cleaner along the back of the fan where the
plastic grille covers the air intake.
3. Wipe the exterior surfaces of the fan occasionally with a damp cloth (not dripping wet)
and dry thoroughly with a soft dry cloth before operating the fan.
4. Do not use harsh cleaners or materials to clean this unit, doing so will cause damage.
1. Follow cleaning instructions 1-4 above.
2. Retain the original packaging to store your fan.
3. Always store in a dry place.
4. Never store while still plugged in.
5. Never wrap cord tightly around the fan or put any stress on the cord where it enters
the fan as it could cause the cord to fray or break.
If your fan fails to operate, please follow these procedures prior to contacting customer
service:
WARNING:
Always turn off and unplug the fan when leaving the area. Never leave children
unsupervised with access to this fan. There are no serviceable parts in this fan. Do not
attempt to disassemble or repair this product.
CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE FAN AS
THIS COULD CREATE A FIRE OR ELECTRIC SHOCK HAZARD. THE FAN MOTOR
IS FACTORY LUBRICATED FOR LIFE AND WILL REQUIRE NO FURTHER LUBRI-
CATION. NO OTHER USER MAINTENANCE IS REQUIRED OR RECOMMENDED.
IF SERVICE IS REQUIRED, SEND YOUR FAN TO THE NEAREST AUTHORIZED
SERVICE CENTER.
CLEANING INSTRUCTIONS
TO STORE
TROUBLESHOOTING:
Fan is not
plugged into a
220V AC, 50Hz
outlet/receptacle.
Breaker/fuse has
been tripped.
To Next Page
Loading...