Celluon magic cube - Using the Projection Keyboard; Connecting via USB HID

40 41
ENTER.
8) Successful paring will be indicated by solid blue LED
on the Magic Cube™ device.
9) To turn o Magic Cube™, slide the power button to
the left (OFF).
10) Magic Cube™ will connect to host PC automatically
when turned back on.
Connecting via USB HID for Windows and Mac (Plug-n-
play)
1) Connect the host device and Magic Cube™ using mini-
USB to USB cable.
2) Turn on Magic Cube™ by slide the power button to the
right (ON).
3) Successful connection is indicated by solid green LED.
Windows 7 supports multi-touch mouse function. To
switch from keyboard to mouse mode, press and hold
“FN” button and tap the cursor button, located adjacent
to space bar. To change back to keyboard mode, tap the
cursor button once.
Note
Additional features:
Volume adjustment (key click feedback sound) –
1. Press and hold FN and tap ‘up’ arrow to raise volume
2. Press and hold FN and tap ‘down’ arrow to lower
volume
* Note: There are 6 stages of adjustments. Each adjust-
ment requires repeated steps.
Projection keyboard brightness adjustment –
1. Press and hold FN and tap ‘right’ arrow to increase
brightness