Need help?Do you have a question about the CEM DT-2G and is the answer not in the manual?
General| Accuracy (Humidity) | ±5%RH |
|---|---|
| Type | Gauge |
| Temperature Range | 0°C to 50°C |
| Humidity Range | 10%RH ~ 95%RH |
| Resolution (Temperature) | 0.1°C |
Features an LCD screen for digital readout of measurements.
Includes 'beeping' sounds and a red lamp for dangerous leakage levels.
Provides a visual warning for low leakage volume.
Designed for comfortable operation by both hands.
Calibrated at 2450MHz with a range of 0-9.99 mW/cm².
Offers an accuracy of +-1db and uses a 9V battery.
Battery life is 1 year minimum; dimensions are not specified.
Power on the meter and hold two inches from oven seals or glass for readings.
Press the MAX key to hold the maximum detected value on the LCD.
To Next Page
