Need help?Do you have a question about the CEM DT-9881 and is the answer not in the manual?
General| Type | Infrared Thermometer |
|---|---|
| Response Time | 500 ms |
| Distance to Spot Size | 12:1 |
| Laser Power | < 1 mW |
| Power Supply | 9V battery |
| Display | LCD with backlight |
| Accuracy | ±1.5 °C or ±1.5% of reading |
| Resolution | 0.1 °C |
| Emissivity | Adjustable from 0.10 to 1.00 |
| Spectral Response | 8 to 14 μm |
| Operating Temperature | 0°C ~ 50°C (32°F ~ 122°F) |
| Safety Rating | CE |
| Storage Temperature | -20 to 60 °C |
Configure particle counter settings such as sample time, delay, and display options.
Configure HCHO measurement parameters like alarm, average, and display settings.
Configure CO measurement parameters such as alarm value and display options.
Configure the device's date and time settings for accurate logging and operation.
Set the automatic power-off timer to conserve battery life.
To Next Page
