Need help?Do you have a question about the CEM DT-9880 and is the answer not in the manual?
General| Type | Infrared Thermometer |
|---|---|
| Response Time | 500 ms |
| Distance to Spot Size | 12:1 |
| Display | LCD with backlight |
| Power Supply | 9V battery |
| Measuring Range | -50°C to 1000°C (-58°F to 1832°F) |
| Resolution | 0.1°C/°F |
| Emissivity | Adjustable 0.10 to 1.00 |
| Spectral Response | 8 to 14 μm |
| Laser Power | 1 mW |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C~60°C (-4°F~140°F) |
Accessing and configuring settings specific to the Particle Counter measurement.
Adjusting the sample time and volume for gas measurements.
Configuring the delay time before initiating a measurement.
Customizing which particle size channels are displayed on the screen.
Setting to enable or disable the display of ambient temperature and humidity.
Option to set the sampling period for measurements.
Choosing the display mode for particle counter readings.
Setting the time interval between samples for the sampling period.
Configuring alarm levels for particle sizes and managing exceeded prompts.
Accessing and configuring HCHO measurement settings.
Accessing and configuring CO measurement settings.
Setting the waiting time before initiating CO measurement.
To Next Page
