CEM DT-9880 - Level Indication Configuration; HCHO Measurement Mode (DT-9881)

Level Indication
Select the alarm level of the corresponding particle size in the measurement,when the selected
particle size exceeded,the instrument measuring interface will have exceeded the prompt.
8. HCHO Measurement mode(The DT-9881 has the unique function)
On the power on mode,you can use the or button to select, then press ENTER
button to enter the HCHO measure mode,Start to measure HCHO,air temperature and humidity after
clearing a few seconds.Press RUN/STOP button to stop or open the measurement.This mode can
take picture and take video.
Video Borescope User Manual
Particle Counter User Manual
11
Eastern Energy Co., Ltd.
40/4 Vitoondumri Rd., Banbueng
Banbueng, Chonburi, Thailand
Tel: 66-3844-611
7
sale@ete.co.th
www.eastern-energy.com
www.eastern-energy.com