CEM DT-8807H - Customizing Device Settings; Selecting Body or Surface Mode; Setting Temperature Units (°C;°F)

14
Non-Contact Forehead InfraRed Thermometer
9.Function Setting
9-1.Body/Surface Setting
• Press Button for 2 seconds, F1 will Memory/Set
appear in the display.
• Release the button, press Measure Button to change
measure mode.
9-2.Temperature Unit Setting
• Press Button for 2 seconds, F2 will Memory/Set
appear in the display.
• Release the button, press Measure Button to change
temperature unit.
9-3.Buzzer ON/OFF
• Press Button for 2 seconds, F3 will Memory/Set
appear in the display.
• Release the button, press Measure Button to switch
on/off buzzer.
9-4.Longevity Use
The Non-contact Body Infrared Thermometer was
conceived for an intense and professional use, its
longevity is guaranteed for 40000 takings.