temperature measurements, some time (several
minutes) is required after the low (and before the high)
oling process, which must take
lace for the IR sensor.
5.
battery type 9V is
9-Volt battery and place the battery cover
back.
z
temperature measurements are made.
This is a result of the co
p
BATTERY REPLACEMENT
① As battery power is not
sufficient, LCD will display
“ ” replacement with
one new
required.
② Open battery cover,
then take out the battery from instrument and replace
with a new
6. NOTES:
How it Works
Infrared thermometers measure the surface
temperature of an object. The unit’s optics sense
emitted, reflected, and transmitted energy, which is
12
To Next Page
Loading...
