6
6. PARTS LIST (Ref. to Fig. 1)
The items marked () are those Cembre recommend replacing if the tool is disassembled.
These items are supplied on request in the “HT45 Spare Parts Package”.
The guarantee is void if parts used are not Cembre original spares.
When ordering spare parts always specify the following:
- code number of item
- name of item
- type of tool
- tool serial number
ENGLISH
Code N° Item
DESCRIPTION Qty
6090060 01 HANDLE HOLDER 1
6800040 02 RESERVOIR CAP 1
6720020 03 OIL RESERVOIR 1
6480065 04 MAIN HANDLE ASSY 1
6900601 05 SUCTION SCREW 1
6360250 06 O-RING 1
6641020 07 COPPER WASHER 1
6740100 08 5/32" BALL 1
6520160 09 SUCTION SPRING 1
6740120 10 7/32" BALL 1
6520200 11 SPRING 1
6340590 12 BALL POSITIONING DOWEL 1
6360300 13 O-RING 1
6040240 14 BACK-UP RING 1
6160221 15 BODY 1
6780140 16 HEAD SUPPORT 1
6620220 17 RAM 1
6520360 18 SPRING 1
6900020 19 SCREW M 3x8 1
6520380 20 DIE LOCKING SPRING 1
6780360 21 UPPER DIE HOLDER 1
6370240 22 LATCH 1
6520480 23 LATCH SPRING 1
6040500 24 RAM GUIDING RING 1
6520025 25 RAM SPRING 1
6780255 26 DIE SUPPORT 1
6700060 27 CIRCLIP 1
6040100 28 BACK-UP RING 2
6360161 29 O-RING 1
6560262 30 MOVEABLE HANDLE PIVOT 2
Code N° Item
DESCRIPTION Qty
6700060 31 CIRCLIP 4
6520401 32 HANDLE OPENING SPRING 1
6620102 33 PUMPING RAM 1
6360161 34 O-RING 1
6080040 35 RAM GUIDE BUSH 1
6480180 36 MOVEABLE HANDLE 1
6380200 37 MOVEABLE HANDLE GRIP 1
6895020 38 MAX PRESSURE VALVE 1
6040080 39 BACK-UP RING 1
6360140 40 O-RING 1
6360022 41 O-RING 1
6800020 42 PRESSURE TESTING CAP 1
6740120 43 7/32" BALL 1
6520520 44 SPRING 1
6600100 45 BALL SUPPORT 1
6360140 46 O-RING 1
6040080 47 BACK-UP RING 1
6700140 .48 CIRCLIP 2
6560360 49 HEAD PIVOT 2
6440100 50 PRESSURE RELEASE LEVER 1
6760100 51 SPRING PIN Ø 3x16 1
6361881 52 O-RING 1
6020020 53 PRESSURE RELEASE PIN 1
6360120 54 O-RING 1
6900640 55
PRESSURE RELEASE PIN GUIDE
1
6600020 56 SPRING LOADED PIN 1
6520280 57 SPRING 1
6232018 58 LABEL (TG. 0355) 1
6860010 HEAD ASSEMBLY
6000003 SPARE PARTS PACKAGE
To Next Page
Loading...
